/**
 * This Library was originally written by Olivier Van den Eede (4ilo) in 2016.
 * Some refactoring was done and SPI support was added by Aleksander Alekseev (afiskon) in 2018.
 *
 * https://github.com/afiskon/stm32-ssd1306
 */

#ifndef __SSD1306_H__
#define __SSD1306_H__

#include <stddef.h>
#include <_ansi.h>

_BEGIN_STD_C

#include "ssd1306_conf.h"

#if defined(STM32F0)
#include "stm32f0xx_hal.h"
#elif defined(STM32F1)
#include "stm32f1xx_hal.h"
#elif defined(STM32F4)
#include "stm32f4xx_hal.h"
#include "stm32f4xx_hal_gpio.h"
#elif defined(STM32L0)
#include "stm32l0xx_hal.h"
#elif defined(STM32L1)
#include "stm32l1xx_hal.h"
#elif defined(STM32L4)
#include "stm32l4xx_hal.h"
#elif defined(STM32F3)
#include "stm32f3xx_hal.h"
#elif defined(STM32H7)
#include "stm32h7xx_hal.h"
#elif defined(STM32F7)
#include "stm32f7xx_hal.h"
#else
#error "SSD1306 library was tested only on  STM32F0, STM32F1, STM32F3, STM32F4, STM32F7, STM32L0, STM32L1, STM32L4, STM32H7 MCU families. Please modify ssd1306.h if you know what you are doing. Also please send a pull request if it turns out the library works on other MCU's as well!"
#endif

#include "ssd1306_fonts.h"

/* vvv I2C config vvv */

#ifndef SSD1306_I2C_PORT
#define SSD1306_I2C_PORT        hi2c1
#endif

#ifndef SSD1306_I2C_ADDR
#define SSD1306_I2C_ADDR        (0x3C << 1)
#endif

/* ^^^ I2C config ^^^ */

/* vvv SPI config vvv */

#ifndef SSD1306_SPI_PORT
#define SSD1306_SPI_PORT        hspi2
#endif

#ifndef SSD1306_CS_Port
#define SSD1306_CS_Port         GPIOB
#endif
#ifndef SSD1306_CS_Pin
#define SSD1306_CS_Pin          GPIO_PIN_12
#endif

#ifndef SSD1306_DC_Port
#define SSD1306_DC_Port         GPIOB
#endif
#ifndef SSD1306_DC_Pin
#define SSD1306_DC_Pin          GPIO_PIN_14
#endif

#ifndef SSD1306_Reset_Port
#define SSD1306_Reset_Port      GPIOA
#endif
#ifndef SSD1306_Reset_Pin
#define SSD1306_Reset_Pin       GPIO_PIN_8
#endif

/* ^^^ SPI config ^^^ */

#if defined(SSD1306_USE_I2C)
extern I2C_HandleTypeDef SSD1306_I2C_PORT;
#elif defined(SSD1306_USE_SPI)
extern SPI_HandleTypeDef SSD1306_SPI_PORT;
#else
#error "You should define SSD1306_USE_SPI or SSD1306_USE_I2C macro!"
#endif

// SSD1306 OLED height in pixels
#ifndef SSD1306_HEIGHT
#define SSD1306_HEIGHT          64
#endif

// SSD1306 width in pixels
#ifndef SSD1306_WIDTH
#define SSD1306_WIDTH           130
#endif

#ifndef SSD1306_BUFFER_SIZE
#define SSD1306_BUFFER_SIZE   SSD1306_WIDTH * SSD1306_HEIGHT / 8
#endif

// Enumeration for screen colors
typedef enum {
    Black = 0x00, // Black color, no pixel
    White = 0x01  // Pixel is set. Color depends on OLED
} SSD1306_COLOR;

typedef enum {
    SSD1306_OK = 0x00,
    SSD1306_ERR = 0x01  // Generic error.
} SSD1306_Error_t;

// Struct to store transformations
typedef struct {
    uint16_t CurrentX;
    uint16_t CurrentY;
    uint8_t Inverted;
    uint8_t Initialized;
    uint8_t DisplayOn;
} SSD1306_t;
typedef struct {
    uint8_t x;
    uint8_t y;
} SSD1306_VERTEX;

// Procedure definitions
void ssd1306_Init(void);
void ssd1306_Fill(SSD1306_COLOR color);
void ssd1306_UpdateScreen(void);
void ssd1306_UpdateScreenDMA(void);
void ssd1306_DrawPixel(uint8_t x, uint8_t y, SSD1306_COLOR color);
char ssd1306_WriteChar(char ch, FontDef Font, SSD1306_COLOR color);
char ssd1306_WriteString(char* str, FontDef Font, SSD1306_COLOR color);
void ssd1306_SetCursor(uint8_t x, uint8_t y);
void ssd1306_Line(uint8_t x1, uint8_t y1, uint8_t x2, uint8_t y2, SSD1306_COLOR color);
void ssd1306_DrawArc(uint8_t x, uint8_t y, uint8_t radius, uint16_t start_angle, uint16_t sweep, SSD1306_COLOR color);
void ssd1306_DrawCircle(uint8_t par_x, uint8_t par_y, uint8_t par_r, SSD1306_COLOR color);
void ssd1306_Polyline(const SSD1306_VERTEX *par_vertex, uint16_t par_size, SSD1306_COLOR color);
void ssd1306_DrawRectangle(uint8_t x1, uint8_t y1, uint8_t x2, uint8_t y2, SSD1306_COLOR color);
void ssd1306_DrawFillRectangle(uint8_t x1, uint8_t y1, uint8_t x2, uint8_t y2, SSD1306_COLOR color);

void DrawSaving(void);
void DrawLogo(void);


/**
 * @brief Sets the contrast of the display.
 * @param[in] value contrast to set.
 * @note Contrast increases as the value increases.
 * @note RESET = 7Fh.
 */
void ssd1306_SetContrast(const uint8_t value);
/**
 * @brief Set Display ON/OFF.
 * @param[in] on 0 for OFF, any for ON.
 */
void ssd1306_SetDisplayOn(const uint8_t on);
/**
 * @brief Reads DisplayOn state.
 * @return  0: OFF.
 *          1: ON.
 */
uint8_t ssd1306_GetDisplayOn();

// Low-level procedures
void ssd1306_Reset(void);
void ssd1306_WriteCommand(uint8_t byte);
void ssd1306_WriteData(uint8_t* buffer, size_t buff_size);
SSD1306_Error_t ssd1306_FillBuffer(uint8_t* buf, uint32_t len);

_END_STD_C

#endif // __SSD1306_H__